Front/Rear Mount VHD 3PL Twin Rotor Orchard Mower (10ft & 12ft)
- Centre mount and offset RHS 300mm 10ft, 12ft centre mount only
- Suitable for 90 to 200HP Tractors (Subject to Compatible Tractor Specifications)
- The VHD 3PL Twin Rotor Orchard Mower can be front or rear 3PL mounted and a full choice ofmulch throw direction (e.g. each side or both rotors to one side and also rear discharge)
- FM = Front Mounted Mower, THBS = Throw Both Sides, THLH = Throw Left Hand Side, THRH = Throw Right Hand Side, THRE = Throw to the Rear
10ft Rear Mount
VHDOM2R2920-3PL-THBS (GPN: 235067-01)
VHDOM2R2920-3PL-THRH (GPN: 235067-03)
- Width of cut - 2.92m (9'7")
- Deck width - 3.02m (9’11")
- Overall width - 3.38m (11’1”)
- Trucking - 3.4w x 2.3d x 1.2h
- Shipping - 3.4 x 2.3 x 1.2 (9.4 cubic m)
- Weight - 1500kg
- PTO speed - 1000rpm
10ft Front Mount
VHDOM2R2920-3PL-THBS (GPN: 235067-05)
VHDOM2R2920-3PL-THRH (GPN: 235067-07)
- Width of cut - 2.92m (9'7")
- Deck width - 3.02m (9’11")
- Overall width - 3.38m (11’1”)
- Trucking - 3.4w x 2.3d x 1.2h
- Shipping - 3.4 x 2.3 x 1.2 (9.4 cubic m)
- Weight - 1500kg
- PTO speed - 1000rpm
12ft Rear Mount
VHDOM2R3550-3PL-THBS (GPN: 235072-01)
VHDOM2R3550-3PL-THRH (GPN: 235072-03)
- Width of cut - 3.55m (11'8")
- Deck width - 3.66m (12’)
- Overall width - 4.0m (13’1”)
- Trucking - 4.0w x 2.5d x 1.2h
- Shipping - 4.0 x 2.5 x 1.2 (12 cubic m)
- Weight - 1750kg
- PTO speed - 1000rpm
12ft Front Mount
VHDOM2R3550-3PL-THBS (GPN: 235072-01)
VHDOM2R3550-3PL-THRH (GPN: 235072-03)
- Width of cut - 3.55m (11'8")
- Deck width - 3.66m (12’)
- Overall width - 4.0m (13’1”)
- Trucking - 4.0w x 2.5d x 1.2h
- Shipping - 4.0 x 2.5 x 1.2 (12 cubic m)
- Weight - 1750kg
- PTO speed - 1000rpm
Features
- Rigid plate headstock connected to under body structure supports
- Comer Italian heavy duty output shaft gearboxes and PTO shaft incorporating torsion rubber couplings
- Twin 360⁰ Rear Castor wheels including 6.00 x 9" puncture proof tyres and two front rollers
- Full 6mm sides including hardened steel skids
- Short 6mm sides and discharge deflector including formed RHS bumper to allow side discharge
Standard Features
- Deck Materials - 6mm Deck, fully welded top with 6mm side plates
- Deck Profile - Folded easy clean deck design
- Gearbox - 205HP Comer Gearbox driveline with 20 spline input shaft
- PTO Shaft - Comer T80 Series and torsion rubber couplings
- Clutch - 4 Plate clutch with over-run
- Finish - Low bake enamel
- Headstock - 8mm Fixed plate headstock with upper hitch point "Flip Top" feature (Cat 2), working range locked and slot 5⁰ float Fully floating 5⁰ down and 47⁰ up with shock absorbing pad
- Skids - Full 6mm sides including 50 x 8mm hardened steel skids, short 6mm sides and discharge deflector including formed RHS bumper to allow side discharge
- Rotor Bar - 120 x 14mm Spring steel rotor bars with 100 x 13mm blades
- Linkage Mounting - Cat 2 and 3 compatible with high tower 3PL pick up points, 12ft Centre mount only suitable for Front or Rear mount Refer to the configuration specs
- Front & Rear Chains - Galvanized safety chain with rod replacement system
- Tyres - 6.00 x 9" Wheel kit solid rubber forklift tyres fitted std with two front rollers
Note
- Please specify the mounting configuration to be supplied : i.e. Front or Rear mounted