82654c924616cdd2e22bb97e8dd7e793.jpg
Gason

tdc orchard mower

Trailed Drop Centre Twin Rotor Orchard Mower (10ft 2in, 11ft 6in & 13ft 6in)

  • Suitable for 80 to 130HP Tractors (Subject to Compatible Tractor Specifications)
  • The Trailed Wide Drop Centre Mower will accurately follow ground profile of delved ("V") row form, cutting the full depth of the ("V") form and it free floats to changing ground form
  • The Trailed Wide Drop Centre Mower suits orchard rows from 3.8m and wider
  • TR = Trailed

10ft 2in

DC2R3000-TR (GPN: 232702)

  • Width of cut - 3m (9'10")
  • Deck width - 3.1m (10’2")
  • Overall width - 3.8m (11’2”)
  • Trucking - 3.7w x 2.5d x 1.5h
  • Shipping - 3.7 x 2.5 x 2.0 (18.5 cubic m)
  • Weight - TBA
  • PTO speed - 540rpm

11ft 6in

DC2R3400-TR (GPN: 232703)

  • Width of cut - 3.4m (11'2")
  • Deck width - 3.5m (11’6")
  • Overall width - 3.8m (12’6”)
  • Trucking - 3.7w x 2.5d x 1.8h
  • Shipping - 3.7 x 2.5 x 2.0 (18.5 cubic m)
  • Weight - TBA
  • PTO speed - 540rpm

13ft 6in

DC2R4000-TR (GPN: 232704)

  • Width of cut - 4m (13'1")
  • Deck width - 4.1m (13’5")
  • Overall width - 4.4m (14’5”)
  • Trucking - 3.7w x 2.5d x 2.0h
  • Shipping - 3.7 x 2.5 x 2.0 (18.5 cubic m)
  • Weight - TBA
  • PTO speed - 540rpm

Features

  • Twin rotor on centre hinge deck
  • Phased hydraulic rams provide level body lift
  • Two x 220mm diameter rear and four front height adjustable rollers
  • Mulch throw both sides with discharge defectors
  • Full depth side-plates with rear discharge deflectors

Standard Features

  • Deck Material - 6mm Deck, fully welded
  • Deck Profile - Folded easy clean deck design
  • Gearbox - Drive-train being Bare-Co 130HP power divider centrally mounted gearbox to satellite rotor heads
  • PTO Shaft - 8 Series CVJ PTO
  • Clutch - 4 Plate clutch
  • Blades - 100 x 13mm Swing back blades on hardened bushes
  • Linkage Mounting - Trailed - drawbar pull

Notes

  • Mowers must be used in "Vee shape rows" that are central to row and even angle each side otherwise there may be blade contact with the ground
  • Used for typical row forms created by contour forming machines