82654c924616cdd2e22bb97e8dd7e793.jpg
Gason

vhd flat deck taper back twin rotor orchard mower

VHD Flat Deck Taper Back Twin Rotor Orchard Mower (8ft 6in & 10ft)

  • Suitable for 70 to 130HP Tractors (Subject to Compatible Tractor Specifications)
  • The VHD Taper Back Twin Rotor Orchard Mower is available with a centre mount and offset RHS 300mm 3PL Cat 2

8ft 6in

OM2R2510-3PL (GPN: 235202-01)
OM2R2510-3PL-RHT (GPN: 235202-02)

  • Width of cut - 2.51m (8'3")
  • Deck width - 2.59m (8’6")
  • Overall width - 2.96m (9’9”)
  • Trucking - 3.0w x 2.3d x 1.1h
  • Shipping - 3.0 x 2.0 x 1.1 (6.6 cubic m)
  • Weight - TBA
  • PTO speed - 540rpm

10ft

OM2R2930-3PL (GPN: 235203-01)
OM2R2930-3PL-RHT (GPN: 235203-02)

  • Width of cut - 2.93m (9'7")
  • Deck width - 3.00m (9’10")
  • Overall width - 3.38m (11’1”)
  • Trucking - 3.4w x 2.3d x 1.1h
  • Shipping - 3.4 x 2.0 x 1.1 (7.5 cubic m)
  • Weight - TBA
  • PTO speed - 540rpm

Features

  • Two 220mm diameter, height adjustable "Domed End" front rollers
  • Mulch throw both sides with discharge deflectors or lift full side plates for discharge and mulching of small to medium size prunings <50mm

Standard Features

  • Deck Material - 6mm Deck, fully welded top with 6mm side plates
  • Deck Profile - Folded easy clean deck design
  • Gearbox - 130HP Bare-Co 3 Gearbox driveline incorporating torsion rubber couplings
  • PTO Shaft - Bare-Co 8 Series PTO
  • Clutch - 4 Plate clutch with over-run
  • Finish - Low bake enamel
  • Skids - Full 6mm sides including 50 x 8mm hardened steel skids, short 6mm sides & discharge deflector including formed RHS bumper to allow side discharge
  • Rotor Bar - 100 x 11mm Spring steel rotor bars
  • Blades - 100 x 9mm Swing back blades on hardened bushes
  • Linkage Mounting - Centre mounted and offset RHS 300mm 3PL Cat 2
  • Front & Rear Chains - Galvanized safety chain with rod replacement system
  • Tyres - 6.00 x 9" Wheel kit with solid rubber forklift tyres fitted std and 2 front rollers