82654c924616cdd2e22bb97e8dd7e793.jpg
Gason

VHD Taper Back 3PL Single Rotor Slasher (6ft & 7ft)

  • Suitable for 70 to 120HP Tractors (Subject to Compatible Tractor Specifications)

6ft

VHD1R1830-3PL (GPN: 224784)

  • Width of cut - 1.83m (6')
  • Deck width - 1.94m (6’4")
  • Overall width - 2.05m (6’9”)
  • Trucking - 2.1w x 2.3d x 1.2h
  • Shipping - 2.1 x 2.3 x 1.2 (5.8 cubic m)
  • Weight - 726kg
  • PTO speed - 540rpm

7ft

VHD1R2130-3PL (GPN: 229047)

  • Width of cut - 2.13m (7')
  • Deck width - 2.234m (7’4")
  • Overall width - 2.335m (7’8”)
  • Trucking - 2.4w x 2.6d x 1.2h
  • Shipping - 2.4 x 2.6 x 1.2 (7.5 cubic m)
  • Weight - 900kg
  • PTO speed - 540rpm

Features

  • Rigid plate headstock connected to under body structure supports
  • Rear wheel kit (if fitted) for tighter turning (180⁰ castor only) and forward/reverse work (360⁰ castor)
  • Manual adjustment for king pin to remain vertical to maintain same cutting height in forward or reverse operation
  • Heavy duty output shaft gearbox and PTO shaft Comer Italian
  • These features are supported with complimenting options make this slasher ideal for roadside slashingcontractors, councils, and large property owners

Standard Features

  • Deck Material - 6mm Deck, fully welded top with 6mm side plates
  • Deck Profile - Folded easy clean deck design including tapered back for a tighter turning arc
  • Gearbox - 120HP Comer 1:1.42 Gearbox with 20 spline input shaft (1830), 120HP Comer 1:1 Gearbox with 20 spline input shaft (2130) - std 540 RPM Optional 1000RPM
  • PTO Shaft - Comer T80 Series
  • Clutch - 4 Plate clutch with over-run
  • Finish - Low bake enamel
  • Headstock - 8mm Fixed plate headstock with upper hitch point "Flip Top" feature (Cat 2), working range locked & slot 5⁰ down and 47⁰ up with shock absorbing pad and 300mm offset to the left mount points std
  • Offset 3PL - The deck is fitted std with 300mm offset to the Left 3PL mounts as well as the std centre mounts
  • Skids - 6mm Height adjustable sides with simple "lock & dog" adjustment including 100 x 12mm hardened steel skids
  • Rotor Bar - 120 x 14mm Spring steel rotor bars

Options

  • Dual chain
  • Single castor rear wheel kit inc 6.00 x 9" with 1x Solid rubber forklift wheel
  • Single castor rear wheel kit inc 6.00 x 9" with 2x Solid rubber forklift wheel
  • Hydro link wheel kit adjuster (in lieu of fixed link) - see video for demo
  • Single rear 220mm DIA domed end roller
  • Safety stand bolt on
  • Sacrificial skids
  • Oil seal protectors

Notes

  • Hydro link wheel adjuster allows instant foldback from the tractor seat to manoeuvre into corners and obstacles then return to same cutting height
  • Ground stable double rear wheel kit allows tightturning arc with tapered rear corners